Door categorieën bladeren
Ontdekken
Fiverr Pro
Nederlands
$
USD
I will design injection molding cad for consumer electronics in solidwork
Charles
Over deze dienst
Are you designing a consumer electronic device for mass production but don't know if your CAD design will work in an injection mold? Are you facing expensive tooling quotes because of design issues?
I specialize in injection molding CAD design for consumer electronics using SolidWorks. I create production-ready plastic housings, enclosures, and components optimized for injection molding with proper draft angles, wall thickness, ribs, and parting lines that manufacturers can actually mold.
Services included:
- Injection molding CAD design in SolidWorks
- Consumer electronics enclosure optimization
- Proper draft angles (1-3° for smooth ejection)
- Uniform wall thickness design (1.5-3mm typical)
- Rib and boss for structural strength
- Parting line optimization (aesthetic placement)
- Ejector pin placement analysis
- Living hinge de-sign for integrated closures
- Snap-fit integration for screw-less assembly
- DFM report identifying manufacturing issues
Device features:
- PCB mounting and alignment
- Button mechanisms and light pipes
- Display bezels and viewing windows
- Connector port cutouts
- Battery compartments
- Ventilation and thermal management
Ready for production? Let's design it right
Voorkeur voor een leveringsstijl
Laat het de freelancer weten als je voorkeuren voor of zorgen hebt over het gebruik van AI-tools voor het voltooien en/of leveren van je bestelling.
Maak kennis met Charles
Charles
Consumer Electronics CAD Engineer, SolidWorks and Injection Molding
- Afkomstig uitSpanje
- Lid sindsaug 2026
- Gem. reactietijd1 uur
Talen
Spaans, Engels, Duits, Frans, Portugees
Are you a hardware startup or inventor ready to manufacture your product? I am a Senior Mechanical Design Engineer, specializing in Consumer Electronics and Design for Manufacturing (DFM). I bridge the gap between a bare circuit board and mass production. Whether you need a sleek snap-fit plastic enclosure engineered for injection molding, tight-tolerance SolidWorks CAD for CNC machining, or strict 2D technical blueprints for your USPTO patent application, I deliver flawless engineering. I do not design pretty pictures; I engineer products that actually get built.
Andere Industrieel en productontwerp diensten die ik aanbied
Veelgestelde vragen
What makes electronics enclosure design different from other injection molded products?
Electronics enclosures require extreme precision (±0.1-0.2mm tolerances) for PCB fit, precise alignment of buttons/ports to internal components, proper cable routing, EMI shielding considerations, heat dissipation features, and assembly design that protects sensitive electronics.
How do you determine the optimal wall thickness?
For consumer electronics, I typically design 1.5-2.5mm wall thickness balancing strength, moldability, and material cost. Thinner walls (1.2-1.5mm) reduce material and cooling time but require careful rib reinforcement. Thicker walls (2.5-3mm) are stronger but increase cycle time and warping risk.
What is a "parting line" and why does placement matter?
The parting line is where the two mold halves meet, creating a visible seam on your product. Poor placement puts this seam on the front face (ugly). I strategically place parting lines on edges, back surfaces, or natural product divisions so they're invisible from normal viewing angles.
What are "gate locations" and why do they matter?
Gates are where molten plastic enters the mold cavity. Gate location affects: visible gate marks (aesthetic issue), weld lines (weak points where plastic flows meet), warping (uneven cooling), and fill patterns.
How do I know the design will actually work in production?
The Standard package includes DFM (Design for Manufacturing) analysis identifying all potential molding issues before tooling. The Premium package includes detailed mold feasibility report with gate simulation, fill analysis, and manufacturability assessment.
