Ik maak PCB design schema en layout, elektronica en embedded boards, 3d cad model

Sommige informatie is automatisch vertaald.
Alex
4,6
4,6

Kenia

Ik spreek Engels

131 bestellingen voltooid

Elektronica en embedded systems engineer

Hoi, ik ben Alex! MSc Elektronica & Embedded Systems Engineer met meer dan 8 jaar ervaring in het ontwerpen van productieklare hardware. Ik lever schema’s, PCB-layouts en firmware in KiCad, OrCAD, Alt...
Lees meer

Niveau 1

Voldoet aan bepaalde prestatiecriteria en toont een sterke potentie op de marktplaats.

Wat mensen goed vonden aan deze freelancer

thomas_tafelmei
DE

Duitsland

4,3
4,3

I would definitely recommend Alex to anyone and work with him again in the future. He was professional and friendly, accommodated my wishes and changes, and...

|
cioci24
US

Verenigde Staten

5
5

Alex is wonderful to work with! He has helped me in ways that I didn't even understand would be needed in the beginning of the project. Superb guidance throughout...

|
thomaschrist990
FR

Frankrijk

5
5

I was very pleased to work with him. Despite having very little information to start with, he managed to deliver outstanding and impressive work. He is highly...

|
Over deze dienst

Productieklaar PCB-ontwerp, schema tot Gerbers.

Gecertificeerd elektronica- en embedded systems engineer met meer dan 8 jaar ervaring in het leveren van productieklare Gerbers, BOM en CPL bestanden voor JLCPCB en PCBWay assemblage. Meer dan 80 boards geleverd in IoT, industriële controle, sensor- en vermogenselektronica van 2-laagse prototypes tot 6-laagse mixed-signal ontwerpen tot 100 MHz.

Je ontvangt:


  • Duidelijke, geannoteerde schema's
  • PCB-layout met DFM/DFA/DFT en IPC-2221 naleving
  • Volledig productiepakket: Gerbers (RS-274X), NC-boor, BOM met leveranciersonderdelen, pick-and-place getest tegen JLCPCB en PCBWay DRC's
  • 3D STEP-bestanden voor behuizing-integratie
  • Review van signaalintegriteit, stroomintegriteit en EMI/EMC vóór fabricage


Proces: Belafspraak voor eisen, schema- en componentkeuze, PCB-layout met plaatsing, reviews DRC/ERC, productiebestanden met fab-geschiktheidschecklist.

Tools: Altium, KiCad, OrCAD, Eagle, EasyEDA, Proteus. Ik kan werken met je bestaande bestanden of vanaf nul beginnen.

Waarom klanten terugkeren: Ik ontwerp voor maakbaarheid vanaf de eerste plaatsing, documenteer alles en blijf beschikbaar voor de revisieronde die altijd volgt op de eerste prototype-test.

Vertrouwelijkheid: NDA's ondertekend.

Lees meer
do pcb design schematic layout, electronics and embedded boards, 3d cad model
Volledig scherm
do pcb design schematic layout, electronics and embedded boards, 3d cad model
Bekijk presentatie
do pcb design schematic layout, electronics and embedded boards, 3d cad modeldo pcb design schematic layout, electronics and embedded boards, 3d cad model

Specialisatie:

Circuit design

•

Schema's

•

Lay-out

•

Voetafdruk

•

Analyse

+1 meer

Bestandsformaat:

Gerber

•

STEP

•

BRD

•

SCH

•

3DS

Software:

Altium ontwerper

•

Eagle CAD

•

KiCad

•

Matlab

•

Simulink

•

arduino

Interface:

HDMI

•

MIPI DSI/CSI

•

I2S

•

TDM

•

UART

•

USB

•

SPI

•

I2C

•

SDIO

•

PCIe

•

Wi-Fi

•

BLE

+3 meer

Mijn portfolio

Reviews

35 reviews van deze dienst
4,6

(26)
(5)
(2)
(2)
(0)
Specificering van de beoordeling
  • Communicatieniveau van de freelancer
    4,7
  • Kwaliteit van de levering
    4,6
  • Waarde van de levering
    4,5
Sorteer op
Meest relevant
  • T

    thomas_tafelmei

    DE

    Duitsland

    4,3

    I would definitely recommend Alex to anyone and work with him again in the future. He was professional and friendly, accommodated my wishes and changes, and demonstrated great expertise—he really knows his stuff and offered good counter-suggestions. Although I had envisioned things in a bit more detail—hoping...

    US$ 400-US$ 600

    Prijs

    3 weken geleden

    Looptijd

    Nuttig?
    Ja
    Geen
  • C

    cioci24

    US

    Verenigde Staten

    5

    Alex is wonderful to work with! He has helped me in ways that I didn't even understand would be needed in the beginning of the project. Superb guidance throughout and definitely helped me avoid issues along the way. It has been a learning experience for me, and I appreciate his excellent attention...

    US$ 100-US$ 200

    Prijs

    8 dagen

    Looptijd

    Nuttig?
    Ja
    Geen
  • J

    jake_northern

    GB

    Verenigd Koninkrijk

    2,7

    He offered good value and the quality of the layout was good. But he missed every single deadline he set, I had to chase up continually and lots of revisions where needed. I gave a very detailed spec which clearly wasn't fully read. After the board arrived I had to do significant fault finding and...

    US$ 800-US$ 1.000

    Prijs

    4 weken geleden

    Looptijd

    Nuttig?
    Ja
    Geen
  • G

    gomommers

    CA

    Canada

    1,7

    He can do an excellent job if he improves his communication and pays closer attention to detail, which would help reduce back-and-forth and make the process more efficient.

    US$ 600-US$ 800

    Prijs

    7 weken geleden

    Looptijd

    Nuttig?
    Ja
    Geen
  • T

    thomaschrist990

    FR

    Frankrijk

    5

    I was very pleased to work with him. Despite having very little information to start with, he managed to deliver outstanding and impressive work. He is highly professional, attentive to his clients, and takes the time to fully understand their needs. I highly recommend him without hesitation.

    US$ 100-US$ 200

    Prijs

    7 dagen

    Looptijd

    Nuttig?
    Ja
    Geen
Reviews

35 reviews van deze dienst
4,6

(26)
(5)
(2)
(2)
(0)
Specificering van de beoordeling
  • Communicatieniveau van de freelancer
    4,7
  • Kwaliteit van de levering
    4,6
  • Waarde van de levering
    4,5
Sorteer op
Meest relevant
  • T

    thomas_tafelmei

    DE

    Duitsland

    4,3

    I would definitely recommend Alex to anyone and work with him again in the future. He was professional and friendly, accommodated my wishes and changes, and demonstrated great expertise—he really knows his stuff and offered good counter-suggestions. Although I had envisioned things in a bit more detail—hoping...

    US$ 400-US$ 600

    Prijs

    3 weken geleden

    Looptijd

    Nuttig?
    Ja
    Geen
  • C

    cioci24

    US

    Verenigde Staten

    5

    Alex is wonderful to work with! He has helped me in ways that I didn't even understand would be needed in the beginning of the project. Superb guidance throughout and definitely helped me avoid issues along the way. It has been a learning experience for me, and I appreciate his excellent attention...

    US$ 100-US$ 200

    Prijs

    8 dagen

    Looptijd

    Nuttig?
    Ja
    Geen
  • J

    jake_northern

    GB

    Verenigd Koninkrijk

    2,7

    He offered good value and the quality of the layout was good. But he missed every single deadline he set, I had to chase up continually and lots of revisions where needed. I gave a very detailed spec which clearly wasn't fully read. After the board arrived I had to do significant fault finding and...

    US$ 800-US$ 1.000

    Prijs

    4 weken geleden

    Looptijd

    Nuttig?
    Ja
    Geen
  • G

    gomommers

    CA

    Canada

    1,7

    He can do an excellent job if he improves his communication and pays closer attention to detail, which would help reduce back-and-forth and make the process more efficient.

    US$ 600-US$ 800

    Prijs

    7 weken geleden

    Looptijd

    Nuttig?
    Ja
    Geen
  • T

    thomaschrist990

    FR

    Frankrijk

    5

    I was very pleased to work with him. Despite having very little information to start with, he managed to deliver outstanding and impressive work. He is highly professional, attentive to his clients, and takes the time to fully understand their needs. I highly recommend him without hesitation.

    US$ 100-US$ 200

    Prijs

    7 dagen

    Looptijd

    Nuttig?
    Ja
    Geen

Gerelateerde tags