Door categorieën bladeren
Ontdekken
Fiverr Pro
Nederlands
$
USD
I will iot rf pcb design for esp32, lora, gps, and satellite communication systems
RF and Antenna PCB Design Engineer for Wireless, IoT, and 5G Systems
Electrical and Electronics Engineer specializing in RF and antenna PCB design for wireless, IoT, and 5G systems. I deliver manufacturing-ready RF circuits, antenna layouts, and impedance-controlled PC...
Over deze dienst
Connected devices live or die by their radio link. An ESP32 board with a poorly matched antenna, a LoRa module with the wrong ground plane, or a GPS receiver starved by RF noise may never lock a signal at all. IoT hardware demands the same RF discipline as any wireless system, just packed into a smaller board.
I design RF PCBs for IoT applications ESP32-based boards, LoRa/LoRaWAN nodes, GPS/GNSS modules, and satellite communication hardware. Every layout is built around proper antenna integration, impedance-matched RF traces, and clean grounding, so your device connects reliably from the first prototype through production.
What you get:
- Schematic design around your chosen module
- RF-aware PCB layout with antenna placement and matching
- Power and grounding design for low-noise RF performance
- Manufacturing-ready Gerber files and BOM
- Design review focused on real-world connectivity
I work with Altium Designer, KiCad, and Eagle, across ESP32, LoRa/LoRaWAN, GPS/GNSS, and satellite (Iridium, NB-IoT) integrations.
Whether you're building a single prototype or scaling an IoT product, I design boards that connect the first time not the fifth.
Message me your specs before ordering.
Andere Elektrotechniek diensten die ik aanbied
Veelgestelde vragen
Which modules and protocols do you have experience with?
I regularly design for ESP32, LoRa/LoRaWAN, GPS/GNSS, and satellite IoT modules such as NB-IoT and Iridium, along with WiFi and Bluetooth connectivity.
Can you help pick the right module for my project?
Yes. If you're unsure which ESP32, LoRa, or GPS module fits your range, power, and cost needs, share your requirements and I'll recommend options.
Will my board be optimized for battery-powered operation?
Absolutely. I design with low-power layout practices and proper RF grounding, which are essential for battery-powered IoT and satellite devices.
What files will I receive when the project is complete?
You'll get manufacturing-ready Gerber files, a Bill of Materials (BOM), schematic files, and a layout file compatible with your chosen software.
Do you offer revisions if adjustments are needed?
Yes, revisions are included based on your selected package. I'll confirm the exact number during our initial project discussion.
