Door categorieën bladeren
Ontdekken
Fiverr Pro
Nederlands
$
USD
Ik ga een pcb ontwerpen voor de Raspberry Pi Compute Module CM4 CM5, Carrier Board, CM5 IO Board
PCB-ontwerper, embedded systems engineer
Hardware-ontwerpingenieur, bedreven in schema's en PCB-ontwerp, Raspberry Pi- en SoC-gerelateerde PCB-ontwerpen, embedded Linux-ontwikkeling en firmwareprogrammering voor microcontrollers.
Gescreend door Fiverr Pro
Hotte is geselecteerd door het team van Fiverr Pro vanwege diens expertise.
Gescreend voor
Elektrotechniek
Wat mensen goed vonden aan deze freelancer
sk_rebricker
Duitsland
Hotte designed a custom dual Raspberry Pi CM5 carrier board for us — DIN-rail mountable, with an STM32H7 microcontroller, managed Ethernet switch, motor and...
hyllis_o
Estland
Hotte created a complex board mixing multiple domains, even though the dimensions and shape that I gave him for the board was rather small, and the position...
medpeek
Spanje
Hotte delivered the project with considerable speed, understanding and improving the requirements I asked before and during the project development. The communication...
jespernissen
Denemarken
I have a little knowledge of PCB’s and Hotte made a PCB for me. Integrated CM5 with multiple USB ports, 4G modem and integrated AC to DC conversion. Super fast...
Over deze dienst
Vetted Pro
- Ontwerp en ontwikkel een professioneel bord op maat met behulp van Raspberry Pi Compute Module 4 (CM4), Compute Module 5 (CM5) of alternatieve modules zoals Banana Pi CM4, Orange Pi CM4/CM5.
- Ontwerp een aangepast draagbord voor Nvidia Jetson Nano, Jetson Xavier NX, AGX.
- Ontwerp een op maat gemaakt basisbord voor NXP iMX8 SoM, op Rockchip SoC gebaseerde SoM
Het wordt vaak een Raspberry Pi CM5 IO-bord, CM5-dragerbord of CM5-basisbord genoemd.
Ik heb dergelijke aangepaste PCB's ontworpen voor Raspberry Pi CM4, Raspberry Pi CM5, Orange Pi CM5, Banana Pi CM5, Radxa CM5, ComputeLab iMX8, Toradex iMX7, Toradex iMX8, Nvidia Jetson Nano, Jetson Xavier NX en nog veel meer.
Neem contact met mij op voordat u mijn gig boekt, zodat ik kan controleren of ik beschikbaar ben en wat de verdere projectdetails zijn.
Meer design showcases kunt u bekijken op mijn persoonlijke website:
https://raspipcb.com
Mijn portfolio
Andere Elektrotechniek diensten die ik aanbied
Reviews
79 reviews van deze dienst
| (76) | ||
| (3) | ||
| (0) | ||
| (0) | ||
| (0) |
Specificering van de beoordeling
- Communicatieniveau van de freelancer
- Kwaliteit van de levering
- Waarde van de levering
Sorteer op
Meest relevant
S sk_rebricker
Duitsland
Hotte designed a custom dual Raspberry Pi CM5 carrier board for us — DIN-rail mountable, with an STM32H7 microcontroller, managed Ethernet switch, motor and lighting control, and dual CSI camera interfaces (FPC + HDMI). This was not a simple board, and his work was excellent from start to finish. Professionalism:...
US$ 2.000-US$ 3.000
Prijs
3 weken geleden
Looptijd
Nuttig?H hyllis_o
Terugkerende klant
Estland
Hotte created a complex board mixing multiple domains, even though the dimensions and shape that I gave him for the board was rather small, and the position of multiple connectors external and internal were fixed, and not necessarily in the most ideal position for the layout. I haven't tested the assembled...
US$ 1.500-US$ 2.000
Prijs
11 dagen
Looptijd
T 
Reactie van de freelancer
Nuttig?M medpeek
Spanje
Hotte delivered the project with considerable speed, understanding and improving the requirements I asked before and during the project development. The communication was fluid during the whole project. He delivered all the needed files and guided me through the ordering process. 10/10!
US$ 2.000-US$ 3.000
Prijs
2 dagen
Looptijd
Nuttig?M mharraway
Nederland
Was very helpful and was able to answer all questions. Was very willing to change design and do revisions. Response time could have been better, but overall delivered exactly what was needed.
US$ 1.500-US$ 2.000
Prijs
10 dagen
Looptijd
Nuttig?J jespernissen
Denemarken
I have a little knowledge of PCB’s and Hotte made a PCB for me. Integrated CM5 with multiple USB ports, 4G modem and integrated AC to DC conversion. Super fast delivery and he even guided me how to make some changes myself in EasyEDA. Overall very happy with the work and the service and i will definitely ask Hotte next time i need a PCB
US$ 800-US$ 1.000
Prijs
3 dagen
Looptijd
Nuttig?
Reviews
79 reviews van deze dienst
| (76) | ||
| (3) | ||
| (0) | ||
| (0) | ||
| (0) |
Specificering van de beoordeling
- Communicatieniveau van de freelancer
- Kwaliteit van de levering
- Waarde van de levering
Sorteer op
Meest relevant
S sk_rebricker
Duitsland
Hotte designed a custom dual Raspberry Pi CM5 carrier board for us — DIN-rail mountable, with an STM32H7 microcontroller, managed Ethernet switch, motor and lighting control, and dual CSI camera interfaces (FPC + HDMI). This was not a simple board, and his work was excellent from start to finish. Professionalism:...
US$ 2.000-US$ 3.000
Prijs
3 weken geleden
Looptijd
Nuttig?H hyllis_o
Terugkerende klant
Estland
Hotte created a complex board mixing multiple domains, even though the dimensions and shape that I gave him for the board was rather small, and the position of multiple connectors external and internal were fixed, and not necessarily in the most ideal position for the layout. I haven't tested the assembled...
US$ 1.500-US$ 2.000
Prijs
11 dagen
Looptijd
T Reactie van de freelancer
Nuttig?M medpeek
Spanje
Hotte delivered the project with considerable speed, understanding and improving the requirements I asked before and during the project development. The communication was fluid during the whole project. He delivered all the needed files and guided me through the ordering process. 10/10!
US$ 2.000-US$ 3.000
Prijs
2 dagen
Looptijd
Nuttig?M mharraway
Nederland
Was very helpful and was able to answer all questions. Was very willing to change design and do revisions. Response time could have been better, but overall delivered exactly what was needed.
US$ 1.500-US$ 2.000
Prijs
10 dagen
Looptijd
Nuttig?J jespernissen
Denemarken
I have a little knowledge of PCB’s and Hotte made a PCB for me. Integrated CM5 with multiple USB ports, 4G modem and integrated AC to DC conversion. Super fast delivery and he even guided me how to make some changes myself in EasyEDA. Overall very happy with the work and the service and i will definitely ask Hotte next time i need a PCB
US$ 800-US$ 1.000
Prijs
3 dagen
Looptijd
Nuttig?
